Whisper Power MG DC/DC Converter - 48-12-30-i

Whisper Power MG DC/DC Converter - 48-12-30-i

Meet the DC-DC Galvanic Isolation converter MG 48-12 VDC 30 A -i. Supplies devices with 12 VDC while the battery source produces 48V. This step-down converter features an electronic process that ensures high efficiency with minimal heat output. Its efficiency and dependability render it an excellent choice for consistent voltage conversion. Features galvanic isolation, providing extra stability with distinct electrical circuits.

•     Voltage step down and stabilization
•     Galvanic isolated
•     Premium quality industrial design for high reliability and longer life cycle
•     Silent, no humming, only temperature-controlled fans for cooling
•     No interference with radios, VHF or other sensitive equipment
•     Compact, fast and plug-and-play installation
•     Can be run in parallel for high-demand appliance

Length x width x height, mm (in.) - 83 x 186 x 133 (3.3 x 7.3 x 5.2)
Weight, kg (lb.) - 1.4 (3.1)
Converter type - voltage step down and stabilization
Nominal input voltage - 48 VDC
Input range, specifications met - 30 .. 60 VDC
Input range, no defects - 0 .. 70 VDC
Nominal output voltage - 12.5 VDC
Voltage adjustable - Yes
Output accuracy - 3%
Ripple, peak output voltage - 1%
maximum power output - 400 W
continuous output power - 360 W
Maximum output current - 32 A
Continuous output current at 40 °C - up to 30 A
efficiency - >87%
consumption no load - <25 mA
Ambient operating temperature - -10°C .. +40°C
Storage temperature - -25° .. +85°C
Relative humidity in use - up to 95%, non-condensing
Galvanic isolation - Yes, 500 Vac
Cooling - Mechanical
Current / short circuit - Restricted by current rating
Overheating, shut down - Power restricted by temperature
Faston in / off, max thread thickness - 6 mm²
Mounting holes - dia 4 mm, rh 91 x 177
International Protection rating - IP20
Housing - frame 8
Housing material - Anodized aluminium, ABS end caps
Housing colour - RAL 9006 white aluminium
Meets the following Standards - EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice.