Whisper Power MCC DC/DC Converter - 24-12-20The MCC 24-12 VDC 20A Multifunctional DC/DC B2B Charger, equipped with current limitation and a common ground, provides a three-stage charging process to ensure fast, efficient, and safe charging. This process enhances battery performance and prolongs battery life. The step-down converter delivers a stabilized 12V DC supply to devices while the battery outputs 24V. It also supports parallel usage. - DC-DC converter with current limitation
- Designed to convert 24 VDC to 12 VDC and/or to charge 12 V batteries
- Multi step charge characteristics, programmable
- Delivered with temperature sensor as standard
- Can be used as dimming device for DC lighting
- High quality industrial design for high reliability and longer life cycle
Length x width x height, mm (in.) - 50 x 126 x 88 (2 x 5 x 3.5)
Weight, kg (lb.) - 0.955 (2.1)
Converter type - voltage step down and stabilization 3-step 12 V battery charger, light dimmer function
Nominal input voltage - 24 VDC
Input range, specifications met - 24 .. 32 VDC
Input range, no defects - 0 .. 35 VDC
Nominal output voltage - 13.6 VDC
Voltage adjustable - 12 .. 15 VDC
Output accuracy - 2%
Ripple, peak output voltage - 1%
maximum power output - 300 W
continuous output power - 270 W
Maximum output current - 20 A
Continuous output current at 40 °C - up to 20 A
Efficiency - >90%
consumption no load - <30 mA
Ambient operating temperature - -10°C .. +40°C
Storage temperature - -25° .. +85°C
Relative humidity in use - up to 95%, non-condensing
Galvanic isolation - Yes, 500 Vac
Cooling - Mechanical
Current / short circuit - Restricted by current rating
Overheating, shut down Power restricted by temperature
Faston in / off, max thread thickness - 6 mm²
Mounting holes - dia 4 mm, rh 91 × 177
International Protection rating - IP20
Housing - frame 8
Housing material - Alu / ABS
Housing colour - RAL 9006 blank alu RAL 9011 graphite black
Meets the following Standards - EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU
Note: The above specifications are subject to change without prior notice. | 
