Whisper Power MG DC/DC Converter - 24-24-15-iDC-DC voltage stabilizer MG 24-24 VDC 15 A -i, Galvanic isolated. This device guarantees constant voltage, regardless of fluctuations caused by the battery. For the protection of sensitive electronic equipment against voltage variation. Extra stable due to separated power circuits. - Galvanic isolated
- Voltage stabilization
- Premium quality industrial design for high reliability and longer life cycle
- Silent, no humming, only temperature-controlled fans for cooling
- No interference with radios, VHF or other sensitive equipment
- Compact, fast, plug-and-play
- Can be run in parallel for high-demand appliance
Length x width x height, mm (in.) - 83 x 186 x 133 (3.3 x 7.3 x 5.2)
Weight, kg (lb.) - 1.4 (3.1)
Converter type - voltage stabilization
Nominal input voltage - 24 VDC
Input range, specifications met - 20 .. 35 VDC
Input range, no defects - 0 .. 35 VDC
Nominal output voltage - 24.5 VDC
Voltage adjustable - Yes
Output accuracy - 3%
Ripple, peak output voltage - 1%
maximum power output - 400 W
continuous output power - 360 W
Maximum output current - 16 A
Continuous output current at 40 °C - up to 15 A
efficiency - >87%
consumption no load - <25 mA
Ambient operating temperature - -10°C .. +40°C
Storage temperature - -25° .. +85°C
Relative humidity in use - up to 95%, non-condensing
Galvanic isolation - Yes, 500 Vac
Cooling - Mechanical
Current / short circuit - Restricted by current rating
Overheating, shut down Power restricted by temperature
Faston in / off, max thread thickness - 6 mm²
Mounting holes - dia 4 mm, rh 91 x 177
International Protection rating - IP20
Housing - frame 8
Housing material - Anodized aluminium, ABS end caps
Housing colour - RAL 9006 blank alu
Meets the following Standards EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice. | 
