Whisper Power MG DC/DC Converter - 12-12-30-iDC/DC voltage stabilizer MG 12-12 VDC 30 A -i. Designed for constant output voltage, regardless of fluctuations in input voltage. Protects your electronic equipment from damage caused by voltage variations, such as spikes or drops from the battery. Galvanic isolated model, extra stability due to separated power circuits. - Voltage stabilization
- Galvanic isolated
- Premium quality industrial design for high reliability and longer life cycle
- Silent, no humming, only temperature-controlled fans for cooling
- No interference with radios, VHF or other sensitive equipment
- Compact, fast and plug-and-play installation
- Can be run in parallel for high-demand appliance
Length x width x height, mm (in.) - 83 x 186 x 133 (3.3 x 7.3 x 5.2)
Weight, kg (lb.) - 1.4 (3.1)
Converter type - voltage stabilization
Nominal input voltage - 12 VDC
Input range, specifications met - 9 .. 18 VDC
Input range, no defects - 0 .. 18 VDC
Nominal output voltage - 12.5 VDC
Voltage adjustable - Yes
Output accuracy - 3%
Ripple, peak output voltage - 1%
maximum power output - 490 W
continuous output power - 420 W
Maximum output current - 30 A
Continuous output current at 40 °C - up to 30 A
efficiency - >87%
consumption no load - <25 mA
Ambient operating temperature - -10°C .. +40°C
Storage temperature - -25° .. +85°C
Relative humidity in use - up to 95%, non-condensing
Galvanic isolation - Yes, 500 Vac
Cooling - Mechanical
Current / short circuit - Restricted by current rating
Overheating, shut down Power restricted by temperature
Faston in / off, max thread thickness - 6 mm²
Mounting holes - dia 4 mm, rh 91 x 177
International Protection rating - IP20
Housing - frame 8
Housing material - Anodized aluminium, ABS end caps
Housing colour - RAL 9006 blank alu
Meets the following Standards EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice. | 
