Whisper Power MG DC/DC Converter - 12-12-8-iDC/DC voltage stabilizer MG 12-12 VDC 8 A -i. Delivers a constant output voltage to protect sensitive electronic equipment. Always 12 VDC and 8 A regardless of fluctuations in the supply voltage from your battery. Galvanic isolated, which means that the power circuits are separated. - Galvanic isolated
- Voltage stabilization
- Electronic process, high efficiency, low heat output
- Compact, fast and plug-and-play installation
- Can be run in parallel for high-demand appliance
- Silent, no humming, only temperature-controlled fans for cooling
Length x width x height, mm (in.) - 50 x 151 x 88 (2 x 5.9 x 3.5)
Weight, kg (lb.) - 0.63 (1.4)
Converter type - voltage stabilization
Nominal input voltage - 12 VDC
Input range, specifications met - 9 .. 18 VDC
Input range, no defects - 0 .. 18 VDC
Nominal output voltage - 12.5 VDC
Voltage adjustable - Yes
Output accuracy - 3%
Ripple, peak output voltage - 1%
maximum power output - 110 W
continuous output power - 110 W
Maximum output current - 8 A
Continuous output current at 40 °C - up to 8 A
efficiency - >87%
consumption no load - <25 mA
Ambient operating temperature - -10°C .. +40°C
Storage temperature - -25° .. +85°C
Relative humidity in use - up to 95%, non-condensing
Galvanic isolation - Yes, 500 Vac
Cooling - Mechanical
Current / short circuit - Restricted by current rating
Overheating, shut down Power restricted by temperature
Faston in / off, max thread thickness - 6 mm²
Mounting holes - dia 4 mm, rh 58 x 143
International Protection rating - IP20
Housing - frame 6
Housing material - Anodized aluminium, ABS end caps
Housing colour - RAL 9011 graphite black
Meets the following Standards - EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice. | 
