Victron Phoenix Inverter VE.Direct - 24/500VE.Direct communication port
The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets , MacBook’s and other devices
(VE.Direct Bluetooth Smart dongle needed)
Fully configurable :
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut -off and restart levels
• Dynamic cut -off: load dependent cut -off level
• Output voltage 2 10 - 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level
Monitoring :
• In- and output voltage , % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverters are short circuit proof and protected against o verheating, whether due to over load or high ambient temperature.
High start-up power
Needed to start loads such as power co nverters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode , the inverter will switch to stan dby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds) . If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two-pole connecto r, or between battery plus and the left-hand contact of the two-pole connector.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters , we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 mi lliseconds) so that computers and other electronic equipment will continue to operate without disruption.
Specification:Specification:
Cont. power at 25°C (1) 500VA
Cont. power at 25°C / 40°C 400 / 350W
Peak power 900W
Output AC voltage / frequency (adjustable) - 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/ - 0,1%
Input voltage range - 18,4 - 34V
DC low shut down (adjustable) - 18.6V
Dynamic (load dependent) DC low shut down (fully configurable) - Dynamic cut-off, see
https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff
DC low restart and alarm (adjustable) - 21.8V
Battery charged detect (adjustable) - 28V
Max. efficiency 90%
Zero-load power 6.5W
Default zero -load power in ECO mode - (default retry interval: 2,5 s, adjustable) - 1.5W
ECO mode stop and start power setting - Adjustable
Protection - a - f
Operating temperature range - -40 to +6 5°C (fan assisted cooling) Derate 1,25% per °C above 40 °C
Humidity (non -condensing) - max 95%
ENCLOSURE
Material & Colour - Steel chassis and plastic cover (blue Ral 5012)
Battery-connection - Screw terminals
Maximum cable cross -section - 10mm² / AWG8
Protection category - IP 21
Weight -3,9kg / 8,5lbs
Dimensions h x w x d, mm (h x w x d, inch) - 86 x 172 x 275 (3.4 x 6.5 x 10.2)
ACCESSORIES
Remote on -off - Yes
Automatic transfer switch - Filax
STANDARDS
Safety - EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3)
EMC EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Automotive Directive - ECE R10-4 | 
