Service Level Update as of 31st March 2020

In response to latest government advice, all sales and admin staff are now working remotely from home.
We are continuing to take calls and process orders, and our warehouse is operating in shifts with minimum staff.
Couriers are delivering and collecting goods, understandably we are starting to see some delays from suppliers but working hard to keep delivery dates updated.

There are no delays on shipping goods that are in stock, however, we are prioritising next day delivery orders to the following customers:
Emergency services including the RNLI, Commercial Fishermen, Port and Harbour Authorities, Aquaculture and other essential services.


Victron BatteryProtect 12/24V-65A

Manufacturers Part Number: BPR000065400


Our Price:
  Inc VAT
  ex VAT
Order Code: ZVICBPR000065400
Manufacturer: Victron
RRP:   Inc VAT

Standard UK delivery is currently
10 - 12 working days
on this product.


Delivery Options
Choose Destination
Postcode/ZIP:  

Standard UK Delivery
10 - 12 Working days
(inc TAX)
FREE


Victron BatteryProtect 12/24V-65A

Maximum continuous load current: 65A.

Peak current: 300A.

Operating voltage range: 6 –35 V.

Current consumption: 1.5mA when on / 0.6mA when off or low voltage shutdown.

Alarm output delay: 12 seconds.

Load disconnect delay / Load reconnect delay: 90 minutes (immediate if triggered by the VE.Bus BMS) / 30 seconds.

Default threshold - Disengage: 10,5V or 21V Engage: 12V or 24V.

Connection: M6.

Dimensions (HxWxD) / Weight: 59 x 42 x 115 mm / 0.2 kg.

BatteryProtect 65A / 100A / 220A - With 7-segment LED display: easy to set up.

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

12/24V auto ranging - The BatteryProtect automatically detects system voltage.

Programming made easy - The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries - In this mode the Battery Protect can be controlled by the VE.Bus BMS.

Ultra low current consumption - This is important in case of Li-ion batteries, especially after low voltage shutdown.

Over voltage protection - To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16 V respectively 32 V.

Ignition proof - No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output - The alarm output is activated if the battery voltage drops below the pre-set disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect - The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the pre-set reconnect voltage.

 

There are currently no reviews for this product.

Click here to submit a review

Our Price:
  Inc VAT
  ex VAT
Order Code: ZVICBPR000065400
Manufacturer: Victron
RRP:   Inc VAT

Standard UK delivery is currently
10 - 12 working days
on this product.


Delivery Options
Choose Destination
Postcode/ZIP:  

Standard UK Delivery
10 - 12 Working days
(inc TAX)
FREE