Sterling Power CVSR70 Pro Connect Current Limiting VSR Relay - 12V / 24V - 70AThese relays have built in current limiting, in a nutshell you can do whatever you want with them, if you overload them they simply switch off safely. The trick with a relay is not to open circuit when it is overloaded, but to remove the load, then open circuit the relay within its rating. With a current limiting VSR in an overload situation the load will surge through the relay for a split second (within the relay's capability), then the built in current limiting device will see this overload and reduce the current from the dangerous level to a very safe 6A, the relay will then safely open circuit with a 6A load to protect the relay and your installation. Once the high load demand has been removed then the relay is safe to re-engage and continue doing its job.
Features
- 0.01 Volt drop
- Ignition feed (not always required)
- Waterproof to IP65
- SAEJ1171 ignition protected
- High overload surge rated
- Back EMF spark arrester
- Remote LED connection
- No ignition feed voltage drop
- Suppressing diodes across relay to prolong life
- Single & twin starter motor disengage connections
- Time delay to prevent engine starter damage
- 12V & 24V automatic selection
- Extremely low quiescent current approx 1mA
- Custom voltage adjustment parmeters available
- Active progressive disconnect algorithm
- Automatic voltage activation
- Automatic voltage de-activation
- Protects primary battery from discharge
- Emergancy auxillary forced activation
- High battery voltage trip protection
- 5 LED information display
- 5 alarm functions and safety trips plus information
- Adjustable relay trigger side operation
- Short circuit protection (prior to engagement)
- Current limiting protection
Specifications: | DC Voltage | Amps
| Size L x W x D mm
| Weight Kg
| Part Number | | 12 & 24 auto | 70 | 140 x 120 x 40 | 0.5 | CVSR70 |
| 
