Sherpa PEAK 3.6 Portable Power Station - 3600WA new member of the PEAK family is here! The mighty 3.6 is a high-performing Portable Power Station, equipped to accept multiple solar and hybrid renewable inputs, so you can keep it on charge while delivering clean, smooth power to your essential appliances. Crafted with durability and performance in mind, the PEAK 3.6 is built to withstand both recreational and professional use.
The sturdy handles provide comfortable portability, while the rugged exterior and solid construction
protect the unit from certain impacts and scratches. Its solar, DC input goes beyond previous capabilities, offering three inputs that can be combined to charge faster than ever from renewable energy.
The PEAK 3.6 Portable Power Station incorporates an automotive grade, high-quality lithium iron phosphate battery (LiFePO4), which can be cycled 3500 times before its original capacity is reduced to 80%. Having a capacity of 3072Wh, expandable up to 15,360Wh by linking four PEAK 3.0-EB extra batteries, this system boasts a significant energy reserve, offering uninterrupted power for extended periods. Its in-built power management means you can simultaneously charge from multiple sources while using your connected devices. With safety in mind, the PEAK 3.6 Battery Management System (BMS) has multiple protection features built-in, to prevent overheating,
overload, and short-circuit. These limit excessive power draw, overcharge and deep discharge to
preserve the longevity of the battery. The PEAK 3.6 is equipped with a pure sine wave inverter, capable of powering appliances and devices in situations where there is no access to mains power. It has a Backup Power Supply function, allowing your appliances to use grid power via the unit and switch over to battery power in 8-20 milliseconds in case of a power cut.
Boasting 15 outputs, the PEAK 3.6 allows you to power multiple devices simultaneously:
AC OUTPUT: 3 x (220V-240V/50Hz) pure sinewave, for running high-power mains appliances
DC OUTPUT: Multiple smart-charge ports that self-regulate power to your devices: USB-A Port x 4, USB-C Port x 2, DC 5525 Port x 1, Wireless Charging Pad x2, Aux Car Port x 1 and XT60 Output x 1, ideal for smartphones, cameras, laptops, fridges,
diesel heaters, and other DC powered devices.
The PEAK 3.6 offers simultaneous charging from mains or DC sources, providing flexibility to recharge the unit quickly:
AC Charging: approximately 1 hour 50 minutes from 0% to 100% from a standard wall outlet.
Solar and hybrid Renewable Charging: approximately 1h 20 min from 0% to 100% at maximum input.
The high-efficiency MPPT charge controller converts solar, wind (DC), or hydroelectric (DC) input, allowing you to go completely off-grid and enjoy free energy.
Onboard Charging: approximately 6 hours using the Charge-500 Smart Charger (sold separately) that can fully charge the PEAK 3.6 while the vehicle is running.
PEAK 3.6
AC Mains Charging Cable
Charging by Vehicle Adapter Cable
MC4 Solar Charging Cable (MC4-XT60)
MC4 Solar Parallel Dual Charging Cable (MC4- 2 x XT60)
Crocodile Clips to XT60 Output Cable
Slotted screwdriver
Accessory Pouch
User Manual | 
