Seaflo WAS12003 Bilge Alarm Control System - 12V/20AThe electronic alarm control system by Seaflo, consists of a water level detector and separate three way control switch and alarm that sends out both a visual and auditory signal if bilge water levels rise above a safe level. When the electronic water level switch detects a high water level it sends a message to the alarm and control switch panel causing the alarm to emit a 85dB alarm and a red LED to light up. The alarm is activated if the water level reaches 41mm and deactivates when it returns to 9.5mm. A three second delay feature is incorporated to prevent any false starts. The three way switch enables the alarm to be switched off with just the warning light lit. The water level detector is completely sealed, does not come into contact with water and will not corrode. Oil and debris will not affect it.
Electronic water level detector, switch panel and alarm
3 way switch can be used to deactivate alarm with only LED lit in emergency
Rated for bilge pumps up to 20A at 12V>
Switch is activated when water level reaches 41mm and deactivates at 9.5mm
3 second delay feature
Sealed fluid detector, will not corrode
Detector not affected by oil or debris
Environmentally safe - does not contain mercury
No moving parts
Alarm volume: 85dB>
Wire: 16 AWG x 1m (Switch)>
Part no. WAS12003
| 
