Raymarine RV-212P RV 3D Bronze T-Hull Trans Port 12 Deg 2m cableRV-212 Bronze Through Hull Transducer
The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision?, SideVision?, high frequency CHIRP fish targeting and RealVision 3D? sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion.
RV-212 Bronze Through Hull Transducer
The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision?, SideVision?, high frequency CHIRP fish targeting and RealVision 3D? sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion.
You?ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-212 system also has a built-in fast response water temperature sensor for quick, accurate readings.
Raymarine?s RV-212 Bronze Through Hull RealVision 3D Transducers can be either port or starbord mounted with internal offset to accommodate hull deadrise angles from 6° to 18°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-212 system works great on trailered boats too.
The RV-212 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)
What?s in the Box?
- RV-212P Bronze Port Transducer with 2-meter cable
Or
- RV-212S Bronze Starboard Transducer with 2-meter cable
- RealVision 3D Transducer Y-Cable
- RealVision 3D 8-meter (26-feet) Transducer Extension Cable
- Anti-rotation bolt kit
- Installation instructions
"
The RV-212 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision?, SideVision?, high frequency CHIRP fish targeting and RealVision 3D? sonar inside. The transducer system has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion.
You?ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-212 system also has a built-in fast response water temperature sensor for quick, accurate readings.
Raymarine?s RV-212 Bronze Through Hull Transducer comes with your choice of a starbord or port mounted RealVision 3D transducer with internal offset to accommodate hull deadrise angles from 6° to 18°. This completely eliminates the need for fairing blocks. The low-profile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV-212 system works great on trailered boats too.
The RV-212 system features rugged cast-bronze through hull bodies suitable for fiberglass or wooden hulls. One transducer transmits and receives to port and downwards, the other to starboard and downwards, ensuring a full 180° of underwater coverage even on boats with deep keels or other underwater protrusions. Each transducer features a 2-meter pigtail, joining y-cable and 8-meter extension cable, resulting in an overall cable length of 10 meters (33 feet.)
What?s in the Box?
- RV-212P Bronze Port Transducer with 2-meter cable
Or
- RV-212S Bronze Starboard Transducer with 2-meter cable
- RealVision 3D Transducer Y-Cable
- RealVision 3D 8-meter (26-feet) Transducer Extension Cable
- Anti-rotation bolt kit
- Installation instructions
| 
