Jabsco Macerator Pump 24v

Jabsco Macerator Pump 24v

The Jabsco 18590-2094 macerator pump is the latest version of the Jabsco run-dry macerator waste water pump, which has a fully sealed motor and a new more powerful chopper blade. The sealed motor consists of O-ring sealed end-bells, sealed bearings and a hard durable powder coating to prevent corrosion occurring both internally and externally. A new four-bladed chopper has been added to further reduce the possibility of clogging. The Jabsco macerator pump still has the run-dry feature present in previous models.

The Jabsco macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self-priming to 5ft this pump will empty a typical 115 litre (30 gallons) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 680 litre (180 gallons) tank can be emptied in a single operation. It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build-up of sediment in the tank which could cause a potential blockage.

The Jabsco macerator pump is also the ideal pump for the emptying of fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also its grinding properties.

• Triple sealed motor to prevent both internal and external motor corrosion
• New four-bladed chopper to reduce clogging
• Detects the absence of fluid to automatically shut-off pump before the impeller is damaged
• Sensor provides adequate run-dry period to allow initial priming of the pump 

Specifications: 

Approvals     Complies with USCG 183.410 and ISO 8846 Marine (Ignition Protection).
Flow Rate Description     45 LPM (11.9 US GPM)
Fuse     15A
Height Description     90mm (3.54")
Length     290mm (11.4")
Outlet     Left Hand 25mm (1") ID Hose
Voltage Description     24V DC
Width     120mm (4.75")
Brand     Jabsco
Warranty     1 Year
Hose Size     25mm / 1", 38mm / 1-1/2"
Model     18590-2094
Self Primes up to     1.2 Metres (4 Feet) Vertical Lift
Inlet Outlet     Inlet 38mm (1-1/2") ID hose / 1-1/2" NPT
Amps Description     8A