Icom IC-M400BBE Fixed Black Box VHF c/w DSC & GPS ReceiverSpace-Saving, Two-Piece Configuration The Icom M400BBE consists of a two-piece, black box confi guration. All function control including DSC operation, can be made from the COMMANDMIC™, HM-195B/SW, and the RF unit, Icom M400BBE, can be installed in an out-of-sight place. New Intuitive User Interface The new menu system is shared with Icom’s latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons. Active Noise Cancelling The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly. 10W Loud Audio, Public Address and Foghorn The Icom M400BB has a built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker. Built-in Class D DSC The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls. Common NMEA Interface When connected to an external GPS receiver, current position and time are shown on the Commandmic display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity. AIS Target Call with Icom MA-500TR When connected to the optional Icom MA500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA500TR. And More - MarineCommander™ compatible
- AquaQuake™ water draining function (HM-195B/SW)
- IPX7 waterproof protection both for IC-M400BBE and HM-195B/SW(1m depth for 30 minutes)
- Dual/tri-watch function for monitoring Ch.16 and/or call channel
- Priority and normal scan
- Meets the latest ITU-R M493-14 regulations
| 
