B&G Triton2 Speed Depth & Wireless Wind Pack with 2 DisplaysSail smarter with the Triton2 Speed/Depth/Wireless Wind pack. Perfect for cruisers and club racers, Triton2 shows you the instrument data you need, where you need it, with a Smart Triducer for speed and depth data and a WS320 Wireless wind sensor for easy-to-install wind data. - Sporting an Optically Bonded 4.1-inch LCD display, Triton2 allows you to see clearly in all conditions with its large clear colour display 100% free from condensation or fogging.
- Transflective LCD technology uses reflected ambient light to enhance day-time visibility, providing the clearest sailing dedicated display available. LED backlighting provides highly adjustable illumination when required, making Triton2 exceptionally efficient and extending time available from your battery capacity.
- Triton2 provides simple on-screen menus controlled by soft-touch and reliable waterproof buttons. Intuitive design makes it easy to configure and use your display.
- At just 8mm thin the Triton2 instrument adds a sleek look to any boat. Nearly half the dimension of its thick competitors, Triton2 won’t get in the way, catch ropes or offend the eye!
- NMEA 2000 certification means you can be confident when adding Triton2 to an existing NMEA 2000 system. NMEA 2000 certification also opens up a wide variety of future expansion options for your Triton² system.
- A straight-forward front mounting method and a clip-on bezel over the (4) mounting screws combine with a single NMEA 2000 connection carrying both power and networked data. The Triton2 is simple and quick to install.
- Triton2 will display B&G Pilot data on a clear status screen. With the addition of a Triton2 Pilot keypad the instrument becomes a fully functional Pilot controller.
- Complete with the new DST-810 thru hull plastic speed and depth transducer.
Triton2 Series Fit out your boat with Triton2 sailing instruments and enjoy crystal-clear displays that put the sailing data you rely on exactly where you need to see it. Your course looks clearer with Triton2
See the data you rely on: Speed, depth, wind and more, in full colour on Triton2’s low-profile, intuitive displays. The 4.1” screen will show you what you need to see, night and day – and even in direct sunlight – giving you all the information you need to sail your boat smarter and in safety, whatever the weather. See what you want to see
Customise Triton2 to show what you want to see, placed exactly where you want to see it. Simple numerical screens show any data available on your network, while the intuitive SailSteer display places everything you need in one place, with wind data and boat speed overlaid on an intuitive diagram that also shows laylines, heading and waypoint information. To help keep you safe on the water, Triton2 will also display AIS data for a clear view of surrounding vessels – and with a linked DSC VHF radio you can call them, straight from the instrument display. Low profile screen
Triton2's low profile design will enhance any cockpit. Standing only 8mm proud, the sleek display has wide viewing angles and exceptional brightness, but consumes a negligible 150mA of power. So, whether you mount the display at the helm, on the bulkhead or over the hatch, you’ll always be able to see the data you need. Add speed, depth and wind with our packs
Expand the capabilities of your Triton2 Displays and save money with our handy packs.
A Speed/Depth pack adds a smart Tri-ducer to feed boat speed, depth and temperature to your Triton2 display via the NMEA 2000 network, or add Wind with our Speed/Depth/Wind pack and our new WS300 series wired or wireless wind sensors. Set up your Triton2 system
Triton2 is so simple to use that you shouldn’t need the manual. Here, B&G Product Expert Mike Sugden talks you through the various Triton2 Display settings and views to ensure you get the most from your B&G display when set up for cruising mode. |
B&G Triton2 Speed Depth & Wireless Wind Pack with 2 Displays Frequenty Asked Questions:
Q. What data can the Triton² display?
A. The Triton² can show a wide range of NMEA 2000 data including: Wind speed and angle, Boat speed and depth, Heading, GPS position, and course over ground, AIS targets and autopilot status, Environmental data like water temperature and barometric pressure.
Q. Is the Triton² compatible with UK sailing instruments and networks?
A. Yes, it's fully compatible with NMEA 2000 networks and integrates seamlessly with: B&G sensors and autopilot systems, Zeus chartplotters and Vulcan MFDs, Third-party NMEA 2000 devices (Raymarine, Garmin, etc.). Perfect for upgrading or expanding existing UK marine electronics systems.
Q. Can the Triton² control a B&G autopilot system?
A. Yes, when paired with a Triton² Pilot Keypad, the display becomes a full autopilot controller. Supports B&G NAC-2 and NAC-3 autopilot computers, Displays pilot mode, heading, and status, Enables manual and automatic steering control.
Q. Is the Triton² waterproof and suitable for UK marine conditions?
A. Absolutely. The Triton² is built for harsh marine environments: IPX7 waterproof rating (submersible up to 1m for 30 minutes), Operates in temperatures from -15°C to +55°C, UV-resistant casing and anti-glare screen. Ideal for exposed helm stations and cockpit installations.
Q. Can I customise the data pages on the Triton²?
A. Yes, the Triton² offers flexible display options: Choose from analog, digital, bar graph, and wind plot formats, Create custom pages with preferred data sources, Auto-scroll and timer functions for racing and cruising.
Q. Does the Triton² support AIS target display?
A. Yes, the Triton² can show AIS targets when connected to an AIS receiver or transponder via NMEA 2000. Displays vessel name, MMSI, speed, and heading, Target filtering and alarms for collision avoidance, AIS SART support for emergency beacons.
Q. How do I update the software on the Triton²?
A. Software updates can be performed via: A connected B&G MFD (e.g. Zeus or Vulcan), USB or SD card using the B&G software update tool, Download latest firmware from B&G's official site. Regular updates improve performance and add new features.
Q. Can I use the Triton² with a B&G HV display?
A. Yes, compatible B&G HV displays can be configured via the Triton² to show desired data. Supports speed, depth, wind, and heading. Note: HV displays using the older Fastnet network are not compatible
|
