The GX2100 MATRIX AIS has a dual channel AIS receiver built-in which allows you to see AIS targets simply by pressing the dedicated AIS key. The MATRIX AIS displays AIS MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG and will allow you to contact an AIS Ship directly using DSC, show your vessels position in relation to AIS targets and alert you when an AIS ship may be approaching to close to your location via the Closest Point of Approach (CPA) Alarm. In addition the MATRIX AIS can be connected to any GPS chart plotter that can accept VDM sentence at 38400 baud.

The MATRIX AIS is capable of entering and saving up to 100 waypoints. These waypoints may be selected and navigated to by using a unique navigation compass display that shows your vessels SOG, COG, BRG (Bearing) and DST (Distance) to the waypoint when connected to an external GPS.

The MATRIX AIS is Class D class DSC VHF with a separate Channel 70 receiver, which allows DSC calls to be received even when listening to traffic on Marine VHF channels.

The DSC DISTRESS function when activated transmits a digital MAYDAY including vessel identification, Latitude / Longitude and time (with GPS connected), to facilitate prompt response. Additional calls that can be made are Individual, All ship - Urgency and Safety, Group, Position report and position request calls.

Easily share position information with other DSC equipped vessels using the position request and position reporting functions. With the push of a few buttons you can request the position of another vessel, or simply send your position information to the vessel you select.

The GPS Position of a received DSC Distress or Position Request call can be shown on a compatible GPS Chart plotter simply by connecting 2 NMEA wires.

The MATRIX AIS includes a 30W Loud Hailer with Fog signals; Bells and Whistles with listenback. For added benefit, the last selected VHF channel can be heard when in the PA or Fog modes.

Need to remotely control the VHF from your cockpit of fly bridge? The MATRIX AIS is RAM3 remote mic capable to control all VHF, DSC and AIS functions at a second station.

The MATRIX AIS features Clear Voice Noise Reduction Technology eliminating unwanted background noises like engines and wind during transmission. This assures transmissions are crystal clear along with dedicated 16/9 key and channel selection. In addition the microphone includes a speaker for crystal clear receiption of transmissions.

Advanced receiver technology rejects the reception of unwanted signals from pagers and other unwanted VHF frequencies. In addition the MATRIX AIS has an receiver attenuator to futher reduce noise in busy harbors and marinas.

There is no question about it. With a big, bold display there is no mistaking the information. The contrast and brightness can be adjusted for situations where the radio cannot be mounted directly in front of you.

The MATRIX AIS is supplied from the factory preloaded with description of the use of Marine channels (16-Distress, 22A-USCG, 71-Pleasure...). The channel names may be customized by the user to easily understand the use of each channel.

By connecting a GPS to the MATRIX AIS; Position, date, and time are also displayed when interfaced with a GPS receiver.

Scanning is not an issue with the MATRIX AIS. The radio can be setup to scan any number of channels with or without a priority channel or simply can be setup to scan between a priority channel and on other channel (dual watch). 

Because the MATRIX AIS is built better, it’s back better. If your Standard Horizon MATRIX AIS ever fails for any reason including water damage during normal use in the first three years, STANDARD HORIZON will repair or replace it free, without hassle or charges…period! If it fails thereafter in normal use it for the life time of the product it is covered by Standard Horizon’s Lifetime Flat Rate Service and Customer Loyalty Programs.