ECHOPILOT EASY 2 AIS RECEIVER (DUAL CHANNEL)

EasyAIS 2 (Automatic Identification System)

AIS (Automatic Identification System) is a new international safety standard that will aid collision avoidance for all sizes of vessel.

With EasyAIS commercial vessels will show up, not just on the radar, but also on the chart plotter or PC running navigational software. The Easy AIS is a black box to plug into (AIS) enabled chart plotters which will then allow them to display vessels outputting an AIS signal.

Advantages of EasyAIS –

• 2 Channel receiver
• Very low power consumption
• Improved drivers and matching allows cable lengths of up to 15 metres between the EasyAIS and chart plotter –without data loss.
• NMEA compatible
• GPS data both accepted and output
• A quality product representing value for money
• Compact in size and housed in a robust metal case

Specifications

• Two channel multiplex AIS Receiver "EASY AIS", Part No. 5-A-013
• Double superheterodyne receiver
      1st IF 10.7MHz
      2nd IF 455kHz
• Reception Mode: FSK/GMSK
• Antenna Connector: BNC, 50 Ohm
• Frequencies: 161.975MHz/162.025MHz
• Sensitivity: -114 to -112dBm @ BER 10^-4, set to to -109dBm for AIS telegram reception, RSSI controlled
• Decoder: Integrated GMSK-decoder
• Data Interface Driver: RS232 Line Driver/Receiver, enhanced ESD performance (+/- 15kV HBM)
• Signal -In-/Output: Input: GPS Data (optionally) Output:AIS-Data, NMEA 0183, VDM, GPS Data
      (optionally)
• Data Rate: Output: 38.4kBaud (Standard), optionally 4.8kBaud
  
  
  
• Power Supply: +9 to + 28V @ < 100mA
• Fuse: External fuse necessary, 500mA, slow blow; fuse and fuse-holder included
• User Interface: Switch, Power ON/OFF, LED indicator for Power ON: green, LED indicator for AIS telegram
      reception: red
• Connector/Cable:RJ45 type jack, cable included
      Pin 1: NMEA Data OUT, white-orange
      Pin 5: Ground, white-blue
      Pin 2: Ground, orange
      Pin 6: not Connected, green
      Pin 3: GPS Data IN, white-green
      Pin 7: not Connected, white-
      Pin 4: Ground, blue brown
      Pin 8: +9 to + 28V DC IN, brown