Victron Energy MultiPlus-II Inverter / Charger - 24/3000/70-32The MultiPlus-II is a multifunctional inverter/charger with two AC outputs. Suitable for professional marine, yachting, vehicle, and land-based off-grid systems, it also provides the isolation and redundancy required for ESS setups. PowerControl allows the MultiPlus-II to prevent grid or generator overload, while PowerAssist boosts AC power during peak demand. In the event of an outage, the inverter switches over in milliseconds, keeping computers and sensitive electronics running without interruption. The battery charger combines speed with efficiency through a smart adaptive algorithm that extends battery life. Ready for expansion, the MultiPlus-II supports parallel and three-phase configurations when a system needs to scale.
Note: for a short period of time this product was called MultiGrid-II.
PowerAssist
The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
ESS: Energy Storage Systems
The robust MultiPlus-II is the key component in a Victron Energy Storage System. Our new Dynamic ESS feature takes ESS to the next level. It automatically switches between - or combines - grid, battery and solar energy based on live-pricing, predicted energy-use and solar yield so it's always consuming the cheapest energy.
Uninterrupted AC power (UPS function)
In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
Remote Monitoring and Control
When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…"
Specifications:
PowerControl & PowerAssist - Yes
Transfer switch - 32A
Maximum AC input current - 32A
INVERTER
DC Input voltage range - 12V - 9,5–17V
Output - Output voltage: 230 VAC ± 2 % Frequency : 50 Hz ± 0,1 % (1)
Cont. output power at 25 °C (3) - 3000 VA
Cont. output power at 25 °C - 2400 W
Cont. output power at 40 °C - 2200 W
Cont. output power at 65 °C - 1700 W
Max apparent feed -in power - 3000 VA
Peak power - 5500 W
Maximum efficiency - 94%
Zero load power - 13W
Zero load power in AES mode - 9W
Zero load power in Search mode - 3W
CHARGER
AC Input Input voltage range: 187 -265 VAC
Input frequency: 45 – 65 Hz
Charge voltage 'absorption' - 28.8 V
Charge voltage 'float' - 27.6 V
Storage mode - 26.4 V
Max. battery charge current - (4) 70A
Battery temperature sensor - Yes
GENERAL
Auxiliary output - Yes (32 A)
External AC current sensor (optional) - 50 A or 100 A
Programmable relay - Yes
Protection - a – g
VE.Bus communication port - For parallel and three phase operation,
remote monitoring and system integration
General purpose com. port - Yes, 2x
Remote on -off - Yes
Operating temperature range - -40 to +65 °C (fan assisted cooling)
Humidity (non -condensing) - max 95 %
Maximum altitude - 2000 m.
ENCLOSURE
Material & Colour - Steel, blue RAL 5012
Protection category - IP22
Battery-connection - M8 bolts
230 VAC-connection - Screw terminals 13 mm ² (6 AWG)
Weight kg - 19 kg
Dimensions (hxwxd) mm - 499 x 268 x 141
STANDARDS
Safety - EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission, Immunity - EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
| 
