| 1. Raymarine Navionics USB Chart Reader : Hi Can you tell me if the above card reader will read the SD/MMC Navionics cards? |
| yes, the card reader will work with SD/MMC cards. |
| Date created: 2008-11-03 10:29:21 |
|
 |
| 2. WL200 : will this device enable me to bypass my marina's security passwords? |
| The WiFi antenna will boost your signal up to a range of 1 mile. You will still need to use whatever login/payment details the internet provider that you intend to connect to requires.
This is purely a way to strengthen your signal. |
| Date created: 2008-10-20 17:07:21 |
|
|
| 3. Tacktick wind instrument : Is it possible to get an NMEA feed from this? I.e., wind speed and direction? |
| Yes, you would need to purchese the NMEA interface box from Tacktick (T122) which will be able to retrieve data from the wind system and pass it on. |
| Date created: 2008-10-20 10:30:14 |
|
|
| 4. TackTick T108: what does the 'no NMEA' interface imply..? |
| The NMEA interface box enables the TackTick units to 'talk' to other (non tacktick) equipment. If you dont plan on having the wind/speed/depth data sent to a plotter for example, you will not require the interface box. If you do want it to intergrate with an existing system, the box will be required which means a T104 will be needed. |
| Date created: 2008-10-06 10:22:32 |
|
|
| 5. Air Pocket PC : I would like to buy this as a gift for someone in the States. Can I buy it unlocked. Do we have to have a contract or can just the handset be purchased? |
| The Airo comes sim free, so the end user can simply out their own sim card into it. |
| Date created: 2008-09-24 13:27:46 |
|
|
| 6. Icom 411 - Can you advise how to change the existing MMSI number please |
| the radio would need to be returned to us or Icom to alter the MMSI number - it isnt something you can do without the correct software/cables. |
| Date created: 2008-09-23 09:12:46 |
|
|
| 7. Garmin 3010c - is this unit AIS compatible? |
| Yes, the 3010 is AIS compatible. |
| Date created: 2008-09-17 13:42:02 |
|
|
| 8. Self levelling radome mast mount: which mount should i use for a Garmin GMR18? |
| The Scanstrut LMM1 is the correct mount for a Garmin GMR18 |
| Date created: 2008-09-10 09:16:03 |
|
|
| 9. Prolite 115 15" monitor : Power consumption - what is the maximum watts at 12v power? |
| The prolite monitor consumes 20 watts at 12v power. |
| Date created: 2008-09-05 11:52:55 |
|
|
| 10. Raymarine st2000 plus : Is the above suitable for my boat that is a Kent 27 long keel with bilge plates that weighs just under 4 tons? |
| yes, the ST2000+ is suitable for boats up to 4500kg or 10,000 lbs |
| Date created: 2008-09-02 10:38:37 |
|
|
| 11. VAT - Do I need to pay it if i take my item out of the EU? |
| If you are having the item delivered to a UK/EU address, VAT will need to be payed. |
| Date created: 2008-08-29 10:53:53 |
|
|
| 12. AIS B transponder off on mode : Can the AIS transponder be turned in the off mode to converse power if needed? |
| yes, the unit can be 'silenced' if required (normally by pressing the 'S' button), although you can programme this button to perform a number of tasks which can be done using the software supplied. |
| Date created: 2008-08-25 22:18:56 |
|
|
| 13. Lowrance 5150c : can this unit be flush fitted?..does it take navionics gold?..and to confirm it comes with a external antenna in your price?..thanks. |
| THe 5150C can use Navionics Gold charts (on SD card), and comes with an external antenna included in the box. The unit can also be flush mounted. |
| Date created: 2008-08-22 12:43:06 |
|
|
| 14. ics navtex 6 plus : can you tell me the size of this unit please. |
| The size of the unit is 200mm (H) x 110mm (W) x 155mm (D) |
| Date created: 2008-08-07 09:30:49 |
|
|
| 15. How to interface horizon GPS plotter to Navman 7100 DSC VHF |
| · Connecting VHF 7100, 7200 to a GPS plotter
NMEA OUTPUT + from plotter connects to the yellow wire (NMEA IN) on the NAVMAN VHF7100/7200
NMEA Output – from the plotter connects to Green (NMEA -) on Navman VHF7100/7200 |
| Date created: 2008-07-31 09:55:47 |
|
|
| 16. Raymarine tiller pilot 1000 : I have a TP 1000 and the decks have just been renewed on my boat. Can you tell me the correct distance from the pilot socket to the pin on the tiller? |
| The correct distance from the mounting socket to the tiller pin is 589mm (23.2in) |
| Date created: 2008-07-28 14:09:38 |
|
|
| 17. Standard Horizon CP180e : I noticed that there is what appears to be a data port under the C-card flap - can you advise what this can be used for and and how? |
| The data port is there for future upgrades - it doesnt do anything at present but may well be useable in time to come. |
| Date created: 2008-07-25 09:32:09 |
|
|
| 18. Standard Horizon CP180/300 : Does the external antenna model come supplied with the external antenna and some means of attaching it to a pushpit? |
| The CP180E comes with the external antenna, but doesnt have a bracket to attach it to a rail. The antenna has a standard 1in thread for which a bracket can be easily supplied. |
| Date created: 2008-07-11 12:46:15 |
|
|
| 19. Is it possible to mount NASA AIS radar outside? |
| The unit is not waterproof so needs mounting below decks. |
| Date created: 2008-07-10 22:53:24 |
|
|
| 20. Can the NASA AIS radar be connected to a chart plotter? |
| No, the AIS radar is designed as a standalone unit. |
| Date created: 2008-07-10 22:43:05 |
|
|
